-
Resource
-
-
Sterile Pharmaceutical Filling Line
-
Vial Filling Line
-
Syringe Filling Line
-
Cartridge Filling Line
-
RTU Container Filling Line
-
Ampoule Filling Line
-
Nasal Spray Filling Production Line
View More -
-
Sterile Isolator System
View More -
Bioreactor & Fermentation System
View More -
Sterile Formulation System
-
SVP(Small Volume Parenteral)Preparation System
-
LVP(Large Volume Parenteral)Preparation System
-
CIP(Cleaning In Place)Station System
-
Stainless Vessel
View More -
-
Sterile Water Treatment System
-
Pharmaceutical Purified Water Generator
-
Pharmaceutical Water Distribution System
-
Pharmaceutical Water for Injection (WFI) Machine
-
Pharmaceutical Pure Steam Generator
View More -
-
Cleanroom System
View More -
Other Pharmaceutical Machinery
-
Solid Medicine Production Line
-
IV Fluid Production Line
-
Oral Liquid Production Line
-
Packaging Machine
-
Other Pharmaceutical Machinery
View More -
-
Key Inspection Points for Vial Filling Capping Machine
Category:
Published Time:
2024-01-22
The vial filling capping machine consists of a control system, bottle feeding system, filling system, capping system, etc. It is mainly used for filling and capping operations of non final sterilized products. This operation exposes the products to open air environment, which is a high-risk operation. To effectively reduce the risk of microbial contamination and minimize exposure to operators, the vial filling capping machine can be installed in a sterile isolation system.
The filling accuracy and stability of the vial filling capping machine are related to the difference in product filling volume. During the filling and capping process, environmental conditions, personnel intervention, and the inner packaging material itself can all carry particles and foreign objects, directly threatening the safety of the product. Therefore, during the inspection process, it is necessary to focus on the environmental conditions of filling and plugging operations, personnel intervention, etc. In addition, it is also necessary to check the file system, including the equipment verification report, to ensure the authenticity and completeness of the recorded content. During inspection, attention should be paid to the following aspects:
(1)The environment where the vial filling capping machine is located:
The cleanliness level of the functional room where the filling and capping machine is located should meet the requirements, and the maximum number of people to be accommodated during operation should be specified. The filling and plugging areas should be maintained with unidirectional flow to maintain the environmental conditions of the area. When inspecting, attention should be paid to the wind speed setting and environmental monitoring of the laminar flow system.
(2)Confirmation and verification of vial filling capping machine:
Filling and capping are high-risk operations, and the one-way airflow method should be verified to not cause pollution risks. During inspection, attention should be paid to the recording of airflow streamline testing, especially whether personnel intervention is representative: there may be situations such as bottle inversion, bottle sorting, power outage, and air conditioning system failure during the filling and capping process. During inspection, attention should be paid to the verification and implementation of failure modes; In addition, to reduce the risk of microbial contamination, the time limit of the filling process should be verified.
(3)Personnel operation risk:
Personnel are the biggest source of pollution, and during inspection, attention should be paid to the relevant job training, personnel changing, and personnel operation standards, especially the standardization of bottle pouring and bottle sorting.
Keyword:
: Next Page
CONTACT
Factory: No. 326 Linyu Road, Yuelu District, Changsha, Hunan, China
Shanghai Office: NO211, North Fute Road, Pudong area, Shanghai, China, 200131
Hong Kong Office: 12/F, Cosco Tower, No.183 Queen's Road Central, Sheung Wan, Hong Kong




